ITech IT8811 - Chapter 1 Acceptance and Installation; 1.1 Confirm Package Contents; 1.2 Installation Position

Acceptance and Installation
Copyright © ITECH Electronic Co., Ltd. 1
Chapter1 Acceptance and Installation
1.1 Confirm package contents
Open the package and check the articles within package box before operation.
In case of any non-conformity, missing or appearance wearing, please contact
ITECH immediately.
The package box should comprise:
Device name
Quantity
Model
Remarks
Electronic
load
1 IT8800 series
IT8800 series include:
IT8811/IT8812/IT8812B/
IT8812C
Power line
1
IT-E171/IT-E1
72/
IT-E173/IT-E1
74
The User may select different
power lines based on local
outlet specification. For
detailed specifications, refer to
1.7 Connecting the Power
Line.
CD 1 -
Comprising user manual and
documents related to
programming and grammatical
guidelines.
Factory
alignment
report
1
-
Test report before delivery.
USB
communicati
on line
1
-
-
NOTE
After confirming that package contents are consistent and correct, please
appropriately keep package box and related contents. The package requirements
should be met when the instrument is returned to factory for repair.
IT8800 Series load is supplied with the following optional accessories (sold
separately):
Item
Model
Remarks
Rack mount kit
IT-E151/
IT-E151A
To mount the instrument on a special rack,
user may select this optional.
1.2. Installation position
The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the electronic load
size.