iTriangle Infotech Pvt Ltd aQuiLa TS101-Basic - CHKCFG2; GLOCATE

iTriangle Infotech Pvt Ltd
Interface 33 of 43
Note: Engineering Documents are Highly Confidential
%CHKCFG%aquila123
Response Format:
SL:<Serial_Number>;CID:<Client_ID>;VER:<Firmware_Version>;APN:<Access_Point_Name>; IP :<
IP/Domain>;POR:<Destination_port>;TOF:<Time_Offset>;GSM:<GSM_Status>;ODO:<current_odome
ter>GPS :< Fix_Status>;
<GSM_Status>: 0 -- Connection establishment not yet started
1 – Wrong APN
2 – No GPRS Connection
3 – PDP Deactivated
4 – Connection Active
5 – Wrong server details
7 – GPRS connection closed
<FIX_Status> : YES – GPS fix available
NO – No GPS fix
Example:
SL:150910889; CID:CLIENT_1GV; VER:1_35S01B0532M; APN:internet; IP:121.244.198.205;
POR:18222; TOF:19800; GSM:4,ODO:1143564GPS:YES;
7.6.2.2 CHKCFG2
This command returns the configuration of the device along with the Admin number,
Over Speed in KM, VLNP [vehicle number], Ignition on interval, Ignition off interval.
Min.
Syntax:
%CHKCFG2%<Password>
Example:
%CHKCFG2%aquila123
Response Format:
AD1:<Admin_Number>;AD2:<Admin_Number>;VLPN:<Vehicle_Number>;TI1:<Re
Cording Delay>; TI2:<Transmission Delay>;OS:<Over Speed in KM>;
Example:
AD1:9945782119; AD2:9945782119; VLNP:KA-01 I-2000; TI1:15 Sec; TI2:1 Min; OS:80 KM 10
Sec;
7.6.2.3 GLOCATE
The below command is used to get the current location of the device in the form of a URL, from
which the location of the device can be viewed on the map.
Syntax:
GLOCATE:<Password>
Example:
GLOCATE:aquila123