iTriangle Infotech Pvt Ltd aQuiLa TS101-Basic - Device installation

iTriangle Infotech Pvt Ltd
Interface 35 of 43
Note: Engineering Documents are Highly Confidential
7.6.4 Getter commands
This group of commands will get the current configuration information from the device. Please find
the below details. This command will be applicable only for the configuration commands.
Syntax:
get$<SerialNumber/IMEI>@<Password>#<Command_ID>*
e.g.:
get$141214426@aquila123#IRU_REG*
7.6.5 GroupWise command list
Command ID Configuration Commands Diagnostic Commands Control Commands
CFG_GPRS  
CFG_TL  
IRU_REG  
CFG_GSM  
CHG_TOF  
CFG_OS  
SET_ODOM  
CFG_ANGLPOL  
CFG_ANFILT  
CFG_COMPBF  
CFG_HA  
CFG_HB  
GLOCATE<Password>  
%CHKCFG%<Password>  
%CHKCFG2%<Password>  
SET_DO1  
GetIO<Password>  
CFG_DID  
FORCE_MS<Password>  
restart:<Password>  
Table 8: Command Table
8 Device installation
It is highly recommended that installation of TS101 Basic(GC) device and its accessories must be
done by a trained technician only.