EasyManua.ls Logo

iTriangle Infotech Pvt Ltd aQuiLa TS101-Basic User Manual

iTriangle Infotech Pvt Ltd aQuiLa TS101-Basic
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
iTriangle Infotech Pvt Ltd
Interface 1 of 43
Note: Engineering Documents are Highly Confidential
User Manual
TS101 Basic(GC) V1.0

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the iTriangle Infotech Pvt Ltd aQuiLa TS101-Basic and is the answer not in the manual?

iTriangle Infotech Pvt Ltd aQuiLa TS101-Basic Specifications

General IconGeneral
BrandiTriangle Infotech Pvt Ltd
ModelaQuiLa TS101-Basic
CategoryGPS
LanguageEnglish

Summary

Introduction

Instruction Safety

Guidelines for safely operating the TS101-Basic(GC) device in automotive environments.

Connector Pin out

LED Indications

Configuration

Firmware Update

Using Flash Tool

Instructions on updating firmware using the QFlash tool.

Upgrade Procedure

General steps involved in the firmware upgrade process.

Configuration of upgrade tool

Initial setup and overview of the QFlash tool interface.

Serial Port

How to select the correct COM port for firmware flashing.

Baud Rate

Selecting the appropriate baud rate for firmware communication.

Download Options

Configuring download options for firmware update.

File Setting

Loading the configuration (.cfg) file into the flashing tool.

Upgrade

Initiating and monitoring the firmware upgrade process.

Start updating the firmware

Visual guide to starting the firmware update process.

Upgrade over the Air

Methods for updating firmware remotely using SMS or GPRS.

SMS command

Format for sending SMS commands to initiate Over-The-Air firmware updates.

GPRS Command

Format for sending GPRS commands for Over-The-Air firmware updates.

Device configuration tool

Commands

Configuration Commands

Commands used to configure device settings like GPRS and transmission intervals.

CFG_GPRS

Command to configure GPRS settings such as APN and server details.

CFG_TL

Command to set transmission link type and ignition intervals.

Diagnostic/Status commands

Commands for retrieving current information from deployed devices.

CHKCFG

Command to retrieve device configuration and GPS fix status.

CHKCFG2

Command to retrieve configuration, admin numbers, and vehicle details.

GLOCATE

Command to get the current device location as a URL.

Control Commands

Commands for controlling device functions and operations.

SET_D01

Command to activate or deactivate the digital output.

Device installation

Preparation for the installation

Steps to prepare for installing the TS101 Basic(GC) device.

Best Practices

Recommended practices for wiring and connecting the device during installation.

Pre-installation information

Essential information about the vehicle required before starting installation.

Tools and Equipment required

Lists the necessary tools and equipment for device installation.

Installation Instructions

Step-by-step procedures for installing the device.

General

General guidelines for installing the device, including SIM card and battery connection.

Basic troubleshooting steps