3. Select the Meter Model-1 tab.
4. Select the meter model. If the Intelis 250 or Intelis 250 TC are set up in the MMS prover,
go to step 10. If the Intelis 250 or Intelis 250 TC is not listed, continue to step 5.
5.
Select the Prover tab.
Note: To access the Prover tab, you will be asked for a password. Contact Measurement
Systems if you do not have a password.
6. Select Enter New Meter Model.
Proving the Intelis Gas Meter
Intelis Gas Meter Installation Guide TDC-1782-002 35
Proprietary and Confidential
To Next Page
Loading...
Need help?
General
