ITRON MC3Lite Hardware Installation Guide

2. Extend the mounting straps from the driver-facing side of the vehicle mount (1), wrap
them around the seat back, and buckle them to the opposite side of the vehicle mount
(2).
3. Tighten the straps until the MC3Lite is secure against the seat-back.
Vehicle Sled
The MC3Lite rides in a harness that attaches to a bucket- or bench-style passenger seat.
The Mobile Collection sled is equipped with a dock for the computer and a junction box for
power connectors. The junction box must be attached to the sled prior to use. The sled
should be mounted on the seat before the MC3Lite radio is attached. The MC3Lite must be
mounted high enough on the seat so that the right side ports on the Mobile Collection
computer are accessible.
Vehicle Sled Parts List
The following illustration shows the sled components installed in a vehicle.
Installing MC3Lite Components
MC3Lite Vehicle Preparation and Hardware Installation Guide TDC-1548-002 29
Proprietary and Confidential

ITRON MC3Lite Specifications

General

Brand	ITRON
Model	MC3Lite
Category	Storage
Language	English