To inspect the antenna base and whip
1. Create a maintenance schedule and look for the following.
• Oxidation, corrosion, and dirt on the antenna base.
• Oxidation, corrosion, and dirt on the whip.
• Missing contact element in the whip.
• Loose or damaged coax cable at the antenna base.
• Missing or damaged O-ring gasket.
2. Use a good contact cleaner to clean the area if oxidation or corrosion is found. Follow-up
with a good conductive protectant. Contact Itron Support Service if you need any
assistance.
Cleaning the Antenna
Regular cleaning is recommended to maintain both the performance and the appearance of
your omni-directional RF antenna.
• Clean the antenna in the same manner as your vehicle. Apply a quality car wax to the
antenna and base to help protect the finish and extend the life of the antenna.
Replacing the Antenna Gasket
Inspect the gasket regularly to verify that it is intact, free from debris, and properly seals the
antenna and base. To maintain the integrity and performance of the antenna, Itron
recommends that you replace the gasket located in the antenna base minimally once a
year.
For more information about ordering the gasket, log onto Itron Acess or contact Itron
Support Services at 1-877-487-6602. The replacement gasket part number is
MSE-0210-001, which includes six gaskets.
To replace the antenna gasket
1. Turn the antenna counter-clockwise to remove it from the base.
2. Remove the gasket (1) from the base (2).
MC3Lite System Maintenance
MC3Lite Vehicle Preparation and Hardware Installation Guide TDC-1548-002 40
Proprietary and Confidential
To Next Page
Loading...
Need help?
General
