Page 5-38 ITW Dynatec
Revised 1/16 V6 DCL Touch Screen Controller for Dynamelt M & D ASUs
Item Description
3
A message will confirm if the names were successfully loaded, activated or deactivated, or if
there was an error in loading the names.
4 Press the left-pointing arrow to go to the previous General Settings screen.
5 Press the right-pointing arrow to go to the next General Settings screen.
6 Press the OK button to confirm your entered values and return to the previous screen.
7 Press the ESC button to discard any non-confirmed values and return to the previous screen.
To Next Page
Loading...
