Page 10-10 Component Illustrations
Revised 10/14
ITW Dynatec
D15/D25/D45 V6 DC L ASU Manual #20-63
Grid and Melt Section
Item No.
PN ITW PN
Description
Qty.
1 610304 Heater Plate, 2500W 1
2 610715 M8x20 Socket Head Cap Screw, M8x1.25 x 20mm 4
3 107183 Temperature Sensor 1
4 106137 SHC Screw, M3-0.5X8, ALLOY 1
5 069X058 O-ring 028 2
6 610712 O-ring 9.5X1.8 4
7 610703 Fitting, Plug, G5/8 1
8 610701 Hopper D25 1
8 610722 Hopper D45 1
8 680510 Hopper D15 1
9 104166 Mechanical O/T Thermostat Assembly (option) 1
10 106236 M4, External Tooth Lock Washer 3
11 108698 M4 x 0.7 x 6mm SHC Screw 3
12 610704 O -ring 24x3 1
13 610705 Socket Set Screw Cup Point, M6x1.0 x 30mm 1
14 610702 Filter Shut-Off Assembly 1
15 102411 Insulator, Heater Plate 2
Grid Block-Off Assembly
16 N00192 O-ring 032 1
17 105149 Block- off Plate (use in place of grid) 1
680089 Drop-In Grid (option)
18 104802 Drop-In Grid 1
19 N00192 O-ring 032 1
20 106174 Sensor Adapter 1
21 108297 M8- 1.25 x 20mm HH Screw 4
22 107183 Temperature Sensor 2
23 N00181 O-ring 014 4
24 107526 Stand-off Support, 3” 1
To Next Page
Loading...
