ITW Dynatec DYNAMELT D15 Series - Chapter 11 SYSTEM SCHEMATICS & ENGINEERING DRAWINGS; HEAD SCHEMATIC PN 103117 REV. B

ITW Dynatec
D SERIES V6 DCL ASU Manuals
Schematics Page 11- 1
Revised 10/14
Chapter 11
SYSTEM SCHEMATICS
& ENGINEERING DRAWINGS
HEAD SCHEMATIC PN 103117 REV. B
Notes:
1. ALL WIRE MIL-W-22759/10 OR 12, MINIMUM 600 VOLTS, 260 DEG. C
2. SOLENOID(S) VOLTAGE AND TIMING METHOD DEPENDS O N APPLICATION.
3. RTD WILL BE PLATINUM 100 OHM.