ITW Dynatec DYNAMELT D15 Series - Rear Cover: Hose and Head Electrical and Adhesive Connections

ITW Dynatec
D15/D25/D45 V6 DC L ASU Manual #20-63
Installation Page 3-9
Revised 10/14
Rear Cover: Hose and Head Electrical and Adhesive Connections
Maintain adhesive level
13mm to 100mm (1/2” to
4”) from top of hopper
Filter Guard
Adjustable Pressure
Relief Valve
Pressure Gauge
(optional)
Hose / Head
Adhesive Port
Adhesive Supply
Hose
Hose/Head Electrical Connections are located on either side
of the Filter Outlet Manifold (8 hose/head model shown)
Adhesive Port Connections
Hose/Head #1
Hose/Head #2
Hose/Head #4
Hose/Head #3
Auxiliary #4
Auxiliary #3
Auxiliary #2
Auxiliary #1
#1 #2
#4
#3
#1 #2
#4
#3