ITW Dynatec DYNAMELT D15 Series - Main Screen

ITW Dynatec Programming Page 5-3
V6 DCL Touch Screen Controller for Dynamelt M & D ASUs Revised 1/16
Main Screen
 The Main Screen is displayed automatically when the unit is switched ON.
 The Main Screen provides a comprehensive overview of the status of each of the temperature
zones and the system as a whole. It gives the status and speed of the pump, along with any
adhesive pressures and level status.
Main Screen, if seven or more zones in any column are activated:
11
1
5
4
2
3
6
7
8
9
10
Selected
System #