ITW Dynatec
D SERIES V6 DCL ASU Manuals
Troubleshooting Page 7-15
Revised 10/14
Optional Printed Circuit Boards
Wiring diagrams and other details on the following optional PCBs can be found on the main ASU
schematic in Chapter 11:
Adhesive Level Sensor (hopper low level detection)
Signal Isolator (gear pump auto mode)
Trigger Switch Pump Enable (hand-held applicators/ swirl kits)
EtherNet/ IP, EtherCat or Profibus (communications protocols)
To Next Page
Loading...
