GEFRAN reserves the right to make any kind of design or functional modification at any moment without prior notice.
ORDER CODE
Examples
WE2-6-M-B07C-1-4-D-000
Melt pressure transmitter with type “J” thermocouple, 4...20mA output, 6-pin
connector, 1/2-20UNF thread, 700 bar full scale, 0,5% accuracy class, 153 mm
(6”) rigid stem, 457mm (18”) flexible capillary.
WSPM0-6-M-P03M-1-4-0-000
Melt pressure transmitter autocompensated version, rigid stem, 4...20mA output,
6-pin connector, 1/2-20UNF thread, 3000 psi full scale, 0,5% accuracy class,
153 mm (6”) rigid stem.
000= Standard version
Special or customized versions
available on request
CONNECTOR
6 pin 6
ACCURACY CLASS
0.5% FSO M
0.25% FSO
(ranges ≥ 100 bar/1500 psi)
H
CONFIGURATION
Rigid stem
0
Rigid stem + flexible
1
With thermocouple
2
Standard
THREAD
1/2 - 20 UNF
1
M18 x 1.54
Standard
RIGID STEM LENGTH
(mm / inches) (*)
153mm
4
318mm5
Standard (WE0, WE1, WE2)
Available on request
1
38mm
2
50mm
3
76mm
6
350mm
7
400mm
8
456mm
6”
12.5”
1.5”
2”
3”
14”
16”
18”
FLEXIBLE LENGTH
(mm / inches) (*)
457mm
D
610mmE
Standard (WE0)
Available on request
A
76mm
B
152mm
C
300mm
18”
24”
3”
6”
12”
760mmF
30”
none
0
Standard (WE1, WE2)
100 B01C
70 B07D
RANGE
35
50
B35U
B05D
200
bar
psi
B02C
500 B05C
350 B35D
700
B07C
1500 P15C
1000 P01M
500
750
P05C
P75D
3000 P03M
7500 P75C
5000 P05M
10000 P10M
1000 B01M
15000 P15M
W
000
DTS_WE_04-2013_ENG
GEFRAN spa
via Sebina, 74
25050 PROVAGLIO D’ISEO (BS) - ITALIA
tel. 0309888.1 - fax. 0309839063
Internet: http://www.gefran.com
Exposed capillary
3
8 pin 8
711mmL
Standard (WE3)
28”
none0
Standard (WE3)
(*) max combined stem/flexible length is
914mm - 36”
External autozero
E
Magnetic autozero-
OUTPUT SIGNAL
4...20mA
E
Autocompensation (*)
SP
Standard
-
(*) available for ranges > to 100bar
(*) not available for WE3 version
Sensors are manufactured in compliance with:
- EMC 2004/108/CE compatibility directive
- RoHS 2002/95/CE directive
Electrical installation requirements and Conformity certificate are available on our web site: www.gefran.com
To Previous Page
Loading...
