ITW Dynatec DYNAMELT D15 Series - Page 89

ITW Dynatec Programming Page 5-13
V6 DCL Touch Screen Controller for Dynamelt M & D ASUs Revised 1/16
Extended Pump Mode Settings Screen, Linear Line Speed, Pressure Control
 To go to this screen, press the Settings button on the Pump Control screen.
 The Extended Pump Mode Settings screen allows you to select the Current Pump Mode and to
go to the Automatic Ramp Compensation (ARC) screen.
System 1 Pump 1 Example:
3
1
6
2
3
4
5