Page 5-20 ITW Dynatec
Revised 1/16 V6 DCL Touch Screen Controller for Dynamelt M & D ASUs
Item Description
1
• Press the Standby switch to activate or deactivate the standby condition. When Standby is
activated, the button will be highlighted blue.
• When Standby is activated, all zone temperatures will be set to the standby value
(programmed on the General Settings Screen) and all pumps will be disabled.
2
Press the On/Off button to toggle the system On or Off. When the system is On, the button will
be highlighted green. When the system is Off, the button will be highlighted red.
3
BACK Button
Press to return to the previous screen.
To Next Page
Loading...
