Iveco daily - Adjustment for Reach; Adjustment for Back Rake; Vertical Adjustment and Cushion Trim; Drivers Seat with Three Levels of Adjustment

16
Driver's seat with three levels of adjustment (where fitted)
Adjustment for reach
Raise lever I: the seat is then free to slide forward or backward. Release the handle to lock
the seat in the desired position.
Adjustment for back rake
Rotate handle 2 forward to reduce the back rake. Rotate it backward to increase the back
rake.
Vertical adjustment and cushion trim (where fitted)
Raise handles 3 and 4: the seat is then free to move upwards (driver off the seat) or down-
wards (driver partially
or totally on the seat).
Release handles
to lock the seat in the desired vertical position.
Use either handle
to adjust cushion rake.
Seat suspension (where fitted)
Before entering
the vehicle, the driver should preset the seat suspension, by turning handw-
heelS clockwise or anticlockwise until the indicator aligns with the driver's weight.
The optimum setting
of the suspension should be carried out at the driver's discretion later
on during operation. This
is accomplished by precise adjustements using the handwheel.