Iveco daily - Checking Belts; Checking Antifreeze Concentration; Fuel Feed System

52
4 Checking belts
• Check condition of water pump, fan,
and alternator drive belts.
If worn out or loose, refer to an
authorised dealer
5 Checking antifreeze concentration
• Use a densimeter through filler I to
check the percentage of PARAFLU I I
in the engine coolant. It should be at
least
40%; this value should be kept
constant
all the year round. Top up, if
necessary. with water and 50%
PARAFLU I I to ensure good
protection from corrosion.
Fuel feed system
During
the cold season it is advisable to use
the appropriate fuels produced by oil
companies.