Programmed maintenance
MI
service
1- Change engine
oil
and
filter.
2 - Change
fuel
filter.
3 - Check condition
of
water
pump,
fan
and alternator drive belts.
4 - Check
fluid
level
in
brake hydraulic system.
S- Check efficiency
affront
and rear (as applicable) wheel brake pads and
discs.
Warning!
Brake disc maintenance
to
be carried
out
by
an Authorised Dealer
only.
to
avoid occurance
of
damages
to
seals and/or bearings.
6 - Security
of
InterCooler syustem sleeves and collars (where fitted).
7 - Check
of
steering
box
fixing.
Check
of
steering
box
rack shroud.
Check
of
linkages, steering knuckles and steering column.
a- Check wheel nuts tightening
torque
(follow specifications provided on page 59).
9-
Check adjustment
of
brake and clutch pedals.
10- Check adjustment
of
hand brake
lever.
11- Grease propeller shafts and
the
hinges
of
the
rear
door
of
the
van.
With mileage
per
yearequal,
to
or
below, 20,000
km,
propellershafts should
be
greased
at least once a
year.
Also:
• Security and condition
of
sleeves and hoses
of
air intake system.
•
Visual
check
of
E.G.R.
system components.
• Change air cleaner
oil
(where fitted).
•
Visual
check
of
all
mechanical assemblies for leaks.
• Check bearing grease seals
of
rear hub assemblies (except 59.121).
•
Visual
check of.all pipes and hoses for leaks.
• Check moving parts for interference.
Vehicle
test
and handling.
95
To Next Page
Loading...
