Use
of
controls
Seat
belts
This vehicle
is
equipped with seat belt anchorage points, enabling inertia reel seat belts
to
be
fitted.
To
fasten
the belt, insert the coupling tang
in
the buckle until it
clicks.
To
unfasten the belt, press
the
button located on
the
top
side
of
the buckle.
The belt does
not
need
to
be adjusted by hand
as
it adjusts itself automatically
to
the
optimum length
for
the driver allowing him freedom
of
movement provided
his
move-
ments are
not
abrupt.
The belt mechanism
is
affected by the vehicle's changes
of
attitude and it may lock
in
the
following
cases:
sudden braking
or
acceleration
• vehicle driving on a slope
• when cornering
Warning!
• The belt should
not
be twisted
but
should correctly adhere
to
the driver's hips (but
not
to
his
abdomen
to
prevent him from slipping forward).
• Regularly ensure that bolts securing
the
anchorage points are fully tightened
and
that
the belt
is
not
cut
or
frayed.
•
In
the event
of
a serious accident, renew the seat belt even
if
it does
not
appear
to
be
damaged.
•
Do
not
make alterations
to
the
belt
as
this could result
in
mechanism malfunction.
Seat
belt fitment
can
be carried
OLlt
by any authorised dealer.
Seats
with
headrests
(where
fitted)
Raise
or
lower the headrest,
as
required
to
obtain the desired vertical position.
17
To Next Page
Loading...
