Editing Milling Jobs
100
Operating the material and tool changer via the main menu [Service]
You are in the main menu [Service].
The material and tool changer is not active.
1. Select the sub-menu [Blocks]
2. In the list of blocks, tap on the position
of your choice.
The material and tool changer will be brought into position and the block holder will be
provided at the loading aid.
You can insert the block (“Inserting the block into the device using the loading aid”,
page 101).
The app shows a Wizard which will guide you step by step through the insertion process.
To Next Page
Loading...