EasyManuals Logo

Jacobsen HR800 Service Manual

Jacobsen HR800
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
QUALITY OF CUT 9
en-106
9.8 MISMATCHED CUTTING UNITS ______________________________________________
NOTE: Arrow indicates direction of travel.
Mismatched cutting units is a pattern of different cutting
heights, that gives the grass a stepped cut appearance.
This appearance is normally because of a mismatched
HOC (height-of-cut) adjustment from one cutting unit to
another unit.
Probable Cause Remedy
HOC is different from one cutting unit to another unit. Check and adjust the HOC on cutting units to same
height. See Section 6.6
Difference in cutting unit motor speeds. Check the operation of cutting unit motor(s). Repair or
replace as necessary.
Difference in mower ride height side to side. Check and adjust the tire inflation pressure.
Check and adjust for even mower weight distribution.
TN1278

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jacobsen HR800 and is the answer not in the manual?

Jacobsen HR800 Specifications

General IconGeneral
BrandJacobsen
ModelHR800
CategoryLawn Mower
LanguageEnglish

Related product manuals