1 INTRODUCTION
en-3
1Introduc tion
1.1 IMPORTANT______________________________________________________________
The HR800 with Diesel engine is a self propelled rotary mower. With hydraulic systems to power the traction drive, the
cutting unit lift and lower, the cutting unit drives and the steering.
IMPORTANT: Do the maintenance indicated in this manual to make sure that the quality of cut is kept at a high level.
This Manual is part of the machine and must stay with the machine always. The suppliers of new, or used, machines
need to keep this documentation and supply the owners with a copy.
This equipment is intended for turf care and maintenance, primarily for grass cutting. Accessories approved by
Jacobsen may support alternate secondary functionality to allow more versatile use of the equipment.
Certifications of accessories for global regional use is subject to local regulations.
ALL operators MUST read through this manual and understand the Safety Instructions, controls, lubrication and
maintenance procedures.
Make sure that you obey all safety and road traffic regulations.
You must not make any changes to the machine that are not approved by the manufacturer. This type of change can
release the manufacturer from the liability for any damage or injury.
Only use accessories and attachments approved by Jacobsen.
Use only Jacobsen Genuine spare parts to meet the machine type approval regulations specified by the European
Union.
Discard of worn parts in alignment with all local environment protection regulations. Use the local systems available in
the country where the machine is used, for these recycled materials. When the machine is at its end of life, there are
guidelines in this manual for the removal of the machine from use.
2006/42/EC
These instructions are the Original instructions confirmed by Jacobsen
To Next Page
Loading...
Need help?
General
