48
UMG 511
Configuration
The supply voltage must be connected for confi-
guration of the UMG511.
Apply supply voltage
• The level of supply voltage for the UMG511
can be taken from the label.
• After applying the supply voltage, a startup
screen appears on the display. Approximately
ten seconds later, the UMG511 changes to the
first „Home“ measurement value display.
• If a display does not appear, check whether
the applied supply voltage is within the nomi-
nal voltage range.
Warning!
Supply voltages that do not corres-
pond with the label details can lead
to incorrect functions and damage
to the device.
c
Illu. Example of „Home“ measurement
value.
To Next Page
Loading...
Need help?
General
