68
UMG 511
Display
Brightness
The brightness level of the background illuminati-
on can be adjusted. The brightness level set here
is used during operation of the UMG511.
Setting range: 0 .. 100%
Factory pre-setting: 70%
(0% = dark, 100% = very bright)
Standby
This refers to the time before the brightness chan-
ges to „standby brightness“.
Setting range: 60 .. 9999 seconds
Factory pre-setting: 900 seconds
Standby brightness
This refers to the brightness level changed to after
the end of the standby time. The standby time is
restarted by using keys 1-6.
Setting range: 0 .. 60%
Factory pre-setting: 40%
Screensaver
The screensaver prevents a screen on the LCD
from „sticking“ if the screen does not change for a
longer period of time.
Setting range: yes, no
Factory pre-setting: yes