6
UMG 511
Goods-in check
The correct and safe operation of this device re-
quires appropriate transport, correct storage, po-
sitioning and assembly as well as careful opera-
tion and maintenance. If it can be assumed that
risk-free operation is no longer possible, the de-
vice should be immediately taken out of operation
and secured against being unintentionally being
reinitialised.
Unpacking and packing should only be under-
taken with the usual care with the application of
force, while using suitable tools. The correct me-
chanical condition of the devices should be che-
cked with visual tests. Please pay attention to the
installation instructions included with the device.
It can be assumed that risk-free operation is no
longer possible if, for example, the device:
• displays visible damages,
• does not work despite being connected to the
mains,
• has been subject to unfavourable conditions
(e.g. storage outside of the authorised climate
limits without adaptation to the climate, tha-
wing etc.) or transport stresses (e.g. fall from
a height - even if there are no visible external
damages).
Please check the completeness of the delivery be-
fore beginning with installation of the device.
C
All of the screw clamps belonging
to the supplied device are already
attached.
C
The installation and commissioning
instructions also describe options
that are not part of the scope of
supply.
C
All supplied options and versions
are described on the delivery note.
To Next Page
Loading...
Need help?
General
