8
UMG 511
Description
Intended use
The UMG511 is intended for the measurement of
voltage quality according to EN61000-4-30 in the
building installation, to distributors, power swit-
ches and busbars.
Measurement voltages and measurement currents
must come from the same network.
The UMG511 is suitable for installation in stationa-
ry and weather-protected control panels. Conduc-
tive control panels must be earthed.
The UMG511 can be used in 2, 3 and 4 conductor
networks and in TN and TT networks.
The current mesaurement inputs of the UMG511
are connected using external ../1A or ../5A current
converters.
Measurement in medium and high voltage net-
works generally takes place through current and
voltage converters.
The UMG511 can be used in residential and in-
dustrial areas.
Measurement results can be displayed and saved
then read out and processed further by serial in-
terfaces.
To Next Page
Loading...
Need help?
General
