69
UMG 511
Presentation
You can specify the speed at which new measu-
rement values should appear on the measurement
value displays.
Setting range: fast (200ms), slow (1s)
Factory pre-setting: fast
Rotate
The measurement value displays are automatically
displayed in sequence. The configuration displays
are not affected by this.
Setting range: yes, no
Factory pre-setting: no
Transition time
You can set the time between automatic transition
to the next measurement value display.
Setting range: 0 .. 255 seconds
Factory pre-setting: 2 second
C
The service life of the background
illumination extends if the brightness
of the background illumination is
kept lower.
To Next Page
Loading...
Need help?
General
