1
Replacing external parts
Face cover
To remove:
1. Remove the setscrews A. Remove the face cover.
To attach:
Follow the above procedure in reverse.
Setscrews A
Belt cover
To remove:
1. Remove the cap and setscrew B.
2. Remove the setscrew C.
3. Loosen the two setscrews D.
4. Pull the rear side of the belt cover to disengage it from
the rear cover.
5. Remove the belt cover.
To attach:
Follow the above procedure in reverse.
Make sure all the tabs and hooks t together precisely.
Cap
Setscrew B
Setscrew C
Setscrews D
To Next Page
Loading...
