Janome Skyline S7 - B1 Sensor (Square) Buttonhole

37
Mechanical adjustment
Knee lifter
To adjust:
1. Turn the power switch ON while pressing the Start/
Stop button and the Reverse stitch button. The LCD
shows the Factory Setting Mode. Press "Knee lifter"
key.
2. Attach the knee lifter.
Press "MEM1" key when the knee lifter is free.
3. Push the knee lifter to the right as far as it goes and
press "MEM2" key.
4. Press "OK" key.
Knee lifter is free.
Push the knee lifter to the
right as far as it goes.