RadioBand3 System
The RadioBand system is designed of domestic, commercial and industrial door applications where a safety edge is used. The
system provides a wireless system replacing spiral cables or energy chain systems to provide the safety signal to the door or
gate control panel. The receiver monitors the status of transmitters connected to it.
The transmitter is compatible with 8K2 monitored safety edges or electromechanical safety edges (NC contact), and also with
standard low voltage optical safety edges and OSE-S7502B and OSE-S7502 optical safety edges.
The system complies with EN ISO13849-1:2015, category 2, PLd.
jcmtechnologies
9
To Next Page
Loading...