Safety – 6
against electrostatic discharges; and that the equipment be immune to all electrical shock
wave disturbances. As of 1997, measures have been added to test for fire hazard, electric
shock hazard, and also external exposure to other forms of energy.
The requirements specified by directive 89/336/EEC are as follows. CE compliance requires
that the manufacturer or its authorized representative established within the Community affix
the EC conformity mark to the apparatus or else to the packaging, instructions for use, or
guarantee certificate. The EC conformity mark shall consist of the letters CE as specified and
the figures of the year in which the mark was affixed. This mark should, where appropriate, be
accompanied by the distinctive letters used by the notified body issuing the EC type-
examination certificate. Where the apparatus is the subject of other Directives providing for the
EC conformity mark, the affixing of the EC mark shall also indicate conformity with the relevant
requirements of those other Directives.
UL
1
Compliance
The unit complies with Underwriters Laboratories (UL) standard 1950, the Standard for Safety
Information Technology Equipment.
The unit complies with Underwriters Laboratories (UL) standard 3101.1, Electrical Equipment
for Laboratory Use; Part 1: General Requirements.
1
UL is a registered trademark of Underwriters Laboratories Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
