Getting Started – 13
Immediately inform JDS Uniphase and, if necessary, the carrier if the contents of the shipment
are incomplete, if the unit or any of its components are damaged or defective, or if the unit
does not pass the initial inspection.
Operating Environment
In order for the unit to meet the warranted specifications, the operating environment must meet
the following conditions for temperature, humidity, and ventilation.
Temperature
The unit can be operated in the temperature range of 0 to 40 °C.
Humidity
The unit can be operated in environments with up to 90% humidity (0 to 40 °C). Do not expose
it to any environmental conditions or changes to environmental conditions that can cause
condensation to form inside the unit.
Ventilation
The unit contains a built-in cooling fan. Do not install it in any location where the ventilation is
blocked. For optimum performance, the unit must be operated from a location that provides at
least 75 mm (3 inches) of clearance at the rear and at least 25 mm (1 inch) of clearance at the
bottom. Blocking the air circulation around the unit can cause the unit to overheat,
compromising its reliability.
Warning
• Do not use the unit outdoors.
• To prevent potential fire or shock hazard, do not expose the unit to any
source of excessive moisture.
Storing and Shipping
To maintain optimum operating reliability, do not store the unit in locations where the
temperature falls below -40 °C or rises above 60 °C. Avoid any environmental condition that
can result in internal condensation. Ensure that these temperature and humidity requirements
can also be met whenever the unit is shipped.
Claims and Repackaging
Immediately inform JDS Uniphase and, if necessary, the carrier, if
• The contents of the shipment are incomplete
• The unit or any of its components are damaged or defective
• The unit does not pass the initial inspection
In the event of carrier responsibility, JDS Uniphase will allow for the repair or replacement of
the unit while a claim against the carrier is being processed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
