JDS Uniphase HA9 Series User Manual

Programming Guide – 64
Command Parameters Response Unit MIN MAX DEF Command
Status
(table continued)
:OFFSet? MAX | MIN | DEF NRf dB 0.00 99.99 0 SC
:WAVelength
Numeric Value M 1200NM 1700NM 1310NM N
:WAVelength?
MAX | MIN | DEF NRf M 1200NM 1700NM 1310NM N
:OUTPut
[:STATe] Boolean N
[:STATe?] NRf N
:APOWeron
Boolean| DIS|
LAST
N
:APOWeron?
NRf N
:APMode Boolean N
:APMode? NRf N
:DRIVer Boolean N
:DRIVer? NRf N
:POWer Numeric Value dBM 0.00
7
100.00
8
0.00 N
:POWer? MAX | MIN | DEF NRf dBM 0.00
8
100.00
8
0.00 N
:STATus
:OPERation
[:EVENt]?
NRf SC
:CONDition?
NRf SC
:ENABle
NRf 0 32,76 ? SC
:ENABle?
NRf SC
:NTRansition
NRf 0 32,76 SC
NTRansition?
NRf SC
:PTRansition
NRf 0 32,76 SC
NRf SC
7
:OUTP:POW sets the through power, and :OUTP:POW? returns the through power. The
maximum value for this command is the through power for which the actual attenuation is 100
or 60 dB, depending on the model. The minimum and default values are the through power,
for which the actual attenuation is 0 dB.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

JDS Uniphase HA9 Series Specifications

General

Brand	JDS Uniphase
Model	HA9 Series
Category	Control Unit
Language	English