JDS Uniphase SmartClass - Page 23

Chapter 1 Getting Started
Features and capabilities
SmartClass TPS User’s Guide
June 2014 22035456, Rev 001 5
HPNA
VoIP
– Phone Emulation
– Voice conversation/generate tone/IP voice announce
– Auto answer mode
– Real-time packet metrics (delay, jitter, packet loss)
– E-model QoS and RTCP statistics
– User selectable CODEC
IP Video
–STB Emulation
– Monitor/Through mode
– IP Video QoX (QoS, QoE)
–VMOS
– RTP Loss Distance/Period
STB Boot Test
– Refer to the SmartClass Triple Play Services Tester Addendum to User Guide for STB Boot
Test (document number).
Optical Power
– Testing with the MP60 and MP-80 optical power accessories
Copper
– AC volts
– DC volts
– Resistance
– Leakage
– Distance to short
– Opens (distance) and capacitance
– DC current
–Balance
– Load coil detect
– Good ground test
– POTS calls
Ease of use
– Configurable User Interface
– Save test report to USB stick