Chapter 1 Getting Started
Features and capabilities
SmartClass TPS User’s Guide
4 22035456, Rev 001 June 2014
To discuss a specific configuration or to order options and accessories for your SmartClass Triple
Play Services, contact JDSU Customer Care or your regional sales office. Contact information for
regional sales headquarters is provided on the back cover of this manual. You can also contact
JDSU through the company web site, www.jdsu.com.
Features and capabilities
Features and capabilities of the SmartClass Triple Play Services include the following:
xDSL
– Turn up and troubleshoot DSL services
– Provide packet statistics and analysis.
– Supports G.992.5
– Supports INP >2 (Impulse Noise Protection settings greater than 2)
– Compatibility with VDSL, ADSL2+, and ADSL1 service
– VDSL2 PTM Bonding
– VDSL2 ATM Bonding
– Supports Vectoring
– Supports SOS
– ADSL2+ ATM Bonding
– ADSL2+ PTM Bonding
– RE-ADSL support (Reach Extended ADSL2 - “Annex L”)
– Supports G.INP
– BPT, SNR, Hlog per tone, and QLN per tone graphs
IP Data
– IP layer testing over PPPoE, PPPoA, IPoA, and IPoE including:
– IP ping (IPoE and IPv6oE)
– FTP/HTTP throughput
– Trace route
– Terminate/Through Mode testing
– Web Browser
WiFi
Coax
– Testing with SmartID accessories
NOTE:
The features available on your unit depend on which unit configuration was ordered and which
options are installed.
To Next Page
Loading...
