Chapter 8 WiFi Testing
About WiFi Testing
SmartClass TPS User’s Guide
68 22035456, Rev 001 June 2014
About WiFi Testing
The SmartClass Triple Play Services’s optional WiFi testing features allow performance assess-
ment and troubleshooting the customer premise WiFi network.
The WiFi testing features of the SmartClass include the following:
– Quickly determine the available SSIDs, level and channel of WiFi networks visible from any
location. The test set can attach to a customer's network and provide assessment of the signal
strength throughout the premises.
– Provide a generic WiFi access point (bridged Ethernet to WiFi) to verify IP connectivity, run
tests to back office, or configure CPE.
To access the WiFi tools
– On the Main Menu screen, select WiFi.
The WiFi menu appears.
Depending on your unit configuration, your menu may vary.
WiFi testing is only available on the two WiFi enabled configurations:
CSC-TPSVW and CSC-TPSVW-CU.
Software options also enable certain features.
For additional information about SmartClass Triple Play Services options and services, contact
your local JDSU representative or contact JDSU through the company web site, www.jdsu.com.
Figure 12 WiFi menu
Table 11 WiFi software options
Option Description
WiFiTest Allows all of the WiFi related capable test features (WiFi scan & Histo-
gram, connect to a WiFi Network for testing, and WiFi-to-Ethernet Bridge)
Mobile App Connectivity Provides connectivity to the iOs App.
To Next Page
Loading...
