Chapter 1 Getting Started
Preparation for use
SmartClass TPS User’s Guide
6 22035456, Rev 001 June 2014
– Sent test reports to a FTP server
– Job Manager
StrataSync
– Upload and share test results
– Upload and download configuration files
– Download and enable options
– Check and upgrade software updates
Mobile Device Application
– Support for iOS, and support for Android
– Remote control the SmartClass TPS
– Video Continuity Check from STB
– Technician support content (user manual, quick start guide, training videos, accessory guide)
Preparation for use
This section explains how to start using your SmartClass Triple Play Services.
General preparation
When you unpack the SmartClass Triple Play Services, do the following:
– Inspect the tester for damage.
– If undamaged, save the box and packing materials in case you need to ship the tester in the
future.
Before using the SmartClass Triple Play Services for the first time, do the following:
– Charge the battery.
– Turn the unit ON, and then verify that it is operating properly by navigating through a few
menus.
To Next Page
Loading...
