JDS Uniphase SmartClass - Changing the AC Line Plug Fitting

Chapter 1 Getting Started
Preparation for use
SmartClass TPS User’s Guide
June 2014 22035456, Rev 001 7
Changing the AC line plug fitting
The SmartClass Triple Play Services’s AC Adapter/Charger allows different AC line plug fittings.
To change the AC line plug fitting
1 If an AC line plug fitting is already installed, do the following:
2 Press and hold the button just below the fitting.
3 Slide the fitting out of the slot.
4 Select the appropriate AC line plug adapter.
5 Slide the AC line plug adapter into the slot.
You will hear a click when the fitting is fully inserted.
The AC Adapter/Charger is ready for use.