Jenoptik LDM51 Series User Manual

Parameter setup and measuring operation
LDM52 OEM, Release 003, Revision 000
31
6.4.17 SP – Separator for parameters
Output values are separated by the character SP.
Query:
SP
Set:
SPx
Range of parameter x:
1 … 5
Standard:
1
Output: Separator [SP]: 0x2C
Value x
Symbol
ASCII
1
Comma
0x2C
2
Semicolon
0x3B
3
Space
0x20
4
Slash
0x2F
5
Tabulator
0x09
6.4.18 TE – Terminator
TE is used to set the terminator for the output of measured values in the ASCII format (also see
command SD).
Query:
TE
Set:
TEnn
Range of parameter nn:
1 … 10
Standard:
1
Example:
Input: TE 1
Output: Terminator [TE]: 0x0D0A

Jenoptik LDM51 Series Specifications

General

Brand	Jenoptik
Model	LDM51 Series
Category	Measuring Instruments
Language	English