Jensen A540 - Page 34

16
2. Meaning of the pictograms
Picto
g
ram Meanin
g
Position
order no.:
979886
It is forbidden to enter
the infeed chute.
1x each on the right
and left outside of the
infeed chute and 1x
on the right inside of
the infeed chute
order no.:
979887
Hitch up the machine
before operation.
Disconnect the PTO
shaft before carrying
out maintenance work
on the machine.
Park the machine only
on level
g
round.
Chipper frame right
for attachments at
the rear
Chipper frame left for
front attachments
order no.:
978299
Stay within the
assigned area for
manual loading when
loading the chipper.
infeed chute right
(outside)