64
6. Maintenance
size tightening
torque
Nm
M5 4,5
M6 7
M8 18
M10 33
6.10.3 Lubricating oil
Use oils type CL or CLP according to DIN 51517 (part 2 or 3). See our lubrication
recommendation for free wheels below. Do not use oil with additives of molybdenum
sulfide, graphite etc..
Freewheels must be sealed properly to avoid loss of lubrication (centrifugal force).The
freewheel must be protected against overheating. Allowed operating temperatures -
40°C up to +100°C. When operating temperatures are over 80°C we request for
consultation.
Lubrication recommendation:
oil lubrication
grease lubrication
Operating
temp.
-20°C... +25°C +10°C... +50°C +40°C... +70°C +50°C…+85°C
ISO – VG DIN
51519
10 22 46 100
ARAL Sumurol CM10 Sumurol CM22 Motanol HK46 DEGOL CL100T ARALUB HL2
BP ENERGOLCS10 ENERGOL CS22 ENERGOL CS46 ENERGOL RC100 ENERGREASE LS2
DEA ASTRON HL10 ASTRON HL22 ASTRON HL46 ASTRON HL100 GLISSANDO 20
ESSO
NUTO H10
SPINESSO 10
NUTO H22
SPINESSO 22
NUTO H46
TERESSO 46
NUTO H100 BEACON 2
FUCHS RENOLIN MR3 RENOLIN DTA22 RENOLIN DTA46 RENOLIN MR30 RENOLIT LZR 2
KLÜBER
CRUCOLAN 10 CRUCOLAN 22
CRUCOLAN 46 CRUCOLAN 100 POLYLUB WH2
MOBIL VELOCITE No.6 VELOCITE No.10
VACTRA MEDIUM
VG46
VACTRA HEAVY
VG100
MOBILUX 2
SHELL MORLINA 10 MORLINA 22 MORLINA 46 MORLINA 100 ALVANIA G2
TOTAL AZZOLA ZS10 AZZOLLA ZS22 AZZOLLA ZS46 AZZOLA ZS100 MULTIS 2
filling position drain position
oil level
filling hole
overflow hole
drain hole
bleeder hole
To Next Page
Loading...
