SECTION 3 - MACHINE OPERATION
3-2 31215821
3.3 OPERATING CHARACTERISTICS AND LIMITATIONS
Placards
Important points to remember during operation are provided at
the control stations by DANGER, WARNING, CAUTION, NOTICE,
and INSTRUCTION placards. This information is placed at various
locations for the express purpose of alerting personnel of
potential hazards constituted by the operating characteristics
and limitations of the machine. See foreword for definitions of
placard safety signal words.
Capacities
Raising platform above horizontal with or without any load in
the platform is based on the following criteria:
1. Machine is positioned on a smooth, firm surface
within the limits of the maximum operating slope.
2. Load is within manufacturer’s rated capacity.
3. All machine systems are functioning properly.
Stability
This machine, as originally manufactured by JLG and operated
within its rated capacity on a smooth firm surface within the
limits of the maximum operating slope, provides a stable aerial
platform for all platform positions.
To order go to Discount-Equipment.com
To Next Page
Loading...
