SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
31215821 6-7
Table 6-3. Lubrication Specifications
NOTE: Refer to Table 6-4. for specific lubrication locations on
machine.
KEY SPECIFICATIONS
MPG - Multipurpose Grease having a minimum dripping point of
350° F. Excellent water resistance and adhesive qualities, and
being of extreme pressure type. (Timken OK 40 pounds mini-
mum.)
EPGL - Extreme Pressure Gear Lube (oil) meeting API service classifi-
cation GL-5 or MIL-Spec MIL-L-2105.
HO - Hydraulic Oil. ISO-Vg grade 32, 46.
CL - Chain Lube. Use a good quality chain lubricant.
To order go to Discount-Equipment.com
To Next Page
