SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-2 31215821
6.2 GENERAL SPECIFICATIONS
Machine Specifications
SPECIFICATION 10MSP
Gross Machine Weight: (Platform Empty)
1260 lb
(572 kg)
Machine Height: (Platform Stowed)
57.4 in
(1.45 m)
Maximum Tire Load: (Per Wheel) 710 lb (322 kg)
Machine Ground Clearance:
1.875 in
(47.6 mm)
Machine Turning Radius: (Circle)
65 in
(165 cm)
Tilt Indicator Setting: 1.5°
Maximum Travel Grade (Gradeability):
(Platform STOWED ONLY)
15% (8.5°)
Maximum Travel Grade (Side Slope):
(Platform STOWED ONLY)
5°
Machine Base - Overall: (Width x Length)
29.5 in x 60 in
(75 cm x 152 cm)
* Maximum Drive Speeds: (Operator Variable) 5 mph (8 kp/h)
Maximum Operating Wind Speed:
(For indoor use only) ANSI/CSA: 0 mph (0 m/s)
(For indoor use only) CE/AUS: 0 mph (0 m/s)
Maximum Horizontal Manual Side Force:
(Platform fully extended with Maximum load)
ANSI/CSA:
CE/AUS/JPN:
200 N (45 lbs)
200 N (45 lbs)
Maximum Hydraulic System Pressure:
(Recommended initial setting)
1800 PSI
(124 Bars)
Hydraulic System Capacity: 5 qts U.S. (4.7 L)
Hydraulic Reservoir Capacity: 1 gal (3.78 L)
Machine Component Weight: Platform Weight:
Battery: (per battery)
Front Hood:
75 lb (34 kg)
12V - 65.7 lb (29.8 kg)
6V - 64 lb (29 kg)
12 lb (5.4 kg)
SPECIFICATION 10MSP
To order go to Discount-Equipment.com
To Next Page
