JLG 10msp - Drive Speed Setting Selector Switch

SECTION 3 - MACHINE OPERATION
31215821 3-23
Drive Speed Setting Selector Switch
NOTE: When the platform is elevated, the maximum drive speed
is automatically cut back to approximately 10%. The
Ground Control Module LCD screen will display a turtle
when in this mode, Refer to Machine Status LCD Display in
this section.
Drive Speed Indicator
Drive Speed Setting
Selector Switch
1. Selector Switch (on top
of platform control con-
sole joystick)
Each PRESS on this side
of the switch will
DECREASE maximum
drive speed.
(FEWER LEDs Lit up on
the Drive Speed
Indicator.)
Each PRESS on this side
of the switch will
INCREASE maximum
drive speed.
(MORE LEDs Lit up on
the Drive Speed Indica-
tor.)
1
To order go to Discount-Equipment.com