SECTION 3 - MACHINE OPERATION
31215821 3-17
6 8
Drive Motor Brush Wear Warning
(Counts down 25 hrs. of DRIVE opera-
tion remaining to a 10 sec. shut down
mode)
Drive Motor Brushes Require Service
Replacement -
(See Section 6.7 on page 6-19 for fur-
ther Instructions)
13 6
Traction Module Over Temperature
(DRIVE Disabled)
Allow Drive System Traction Module
to Cool Before Operating (Caused by
extreme temperature)
17 7
Ground Control Module Over Tem-
perature (Machine Stopped)
Allow Ground Control Module to Cool
Before Operating -
(Caused by extreme temperature)
32 7
Pump Motor Over Current
(LIFT UP Disabled)
Platform Load Over Capacity
34 — Aux. #1 - Left Hand Enable Open
Press on Left Hand Enable during
machine operation
35 —
Aux. #1 - Left Hand Enable depressed
during Machine Power-up
Do Not Press on Left Hand Enable
during Machine Power-Up
Table 3-2. LCD Display - Operating Fault Conditions (Continued)
FAULT
CODE
PLATFORM
LEDs
FLASHING
LCD SYMBOL SCREEN LCD TEXT SCREEN
FAULT DESCRIPTION/
MACHINE CONDITION
TO CORRECT PROBLEM
To order go to Discount-Equipment.com
To Next Page
