Johnson Controls TIWM018B22S User Manual

6
P5417089
3.3 Efcient Use of Cooling and Heating
(1) Airow Direction
The appropriate air outlet angle is approx. A
o
as shown
in the table. If the cooling is not sufcient, change the
airow direction. Pay attention to condensation, which
may occur due to a prolonged cooling operation with
low louver angle.
(Refer to Sections 5.1.6 and 5.2.5 for details.)
(2) Airow Volume
“AUTO” is usually used.
(1) Airow Direction
The appropriate air outlet angle is approx. A
o
as shown
in the table. If the heating is not sufcient, change the
airow direction.
(Refer to Sections 5.1.6 and 5.2.5 for details.)
(2) Airow Volume
“AUTO” is usually used.
COOLING
HEATING
NOTE
About Multi-Split System
When the number of indoor unit or the operating mode is changed, the air outlet temperature may be
changed and the indoor temperature is changed. In this case, set as follows.
● During Cooling: Lower slightly the temperature setting.
● During Heating: Raise slightly the temperature setting.
Unit Type A Step
TIWM006B22S ~ 012B22S 30 3
TIWM015B22S ~ 030B22S 32 4
Unit Type A Step
TIWM006B22S ~ 012B22S 55 7
TIWM015B22S ~ 030B22S 50 7
Range of Air Outlet Angle
Air Outlet Angle
A
o
Air Outlet Angle
Range of
Air Outlet Angle
A
o

Johnson Controls TIWM018B22S Specifications

General

Brand	Johnson Controls
Model	TIWM018B22S
Category	Air Conditioner
Language	English