24
P5417089
Function
● This function is used to start or stop unit operation at a pre-set time.
● The timer setting is available for ON TIME and OFF TIME.
On Timer
: The operation is started beyond the set time.
Off Timer : The operation is stopped beyond the set time.
5.2.4 Timer Setting
1
Press “On Timer ” or “Off Timer ” switch.
By repeatedly pressing “On Timer ” or “Off Timer
”, the indication of setting time is changed.
When the transmitting indicator “
” ashes,
the indicator “
” (green) of indoor units is turned
ON and a beeping sound is heard. Timer setup is
complete.
Timer setup functions can be set at half hour
intervals up to 10 hours and at one-hour intervals
up to 23 hours after 10 hours.
Cancellation
Point the transmitter portion of wireless controller towards the receiver
and press “On Timer ” or “Off Timer ” switch.
By repeatedly pressing “On Timer ” or “Off Timer ”, the indication
of setting time is changed.
When 23 hours is displayed and “On Timer ” or “Off Timer ” switch
is pressed, the display disappears.
Then the transmitting indicator “
” ashes, the indicator “ ” (green)
of indoor unit is turned OFF and the beeping sound is heard. Timer
setup is deactivated.
Transmitting Indication
The setting time for “ON TIMER”
is set to 6 hours.
To Next Page
Loading...
Need help?
General
