Johnson Controls TIWM018B22S User Manual

P5417089
1
1. Introduction
2. Safety Instructions
Signal Words
Indicates a hazardous situation that, if not avoided, could result in death or serious
injury.
Indicates a hazardous situation that, if not avoided, could result in minor or moderate
injury.
Indicates information considered important, but not hazard-related (for example,
messages relating to property damage).
General Precautions
To reduce the risk of serious injury or death, read these instructions thoroughly
and follow all warnings or cautions included in all manuals that accompanied the
product and are attached to the unit. Refer back to these safety instructions as
needed.
● This system should be installed by personnel certied by Johnson Controls, Inc. Personnel must be qualied
according to local, state and national building and safety codes and regulations. Incorrect installation could
cause leaks, electric shock, re or explosion. In areas where Seismic Performance requirements are
specied, the appropriate measures should be taken during installation to guard against possible damage
or injury that might occur in an earthquake. If the unit is not installed correctly, injuries may occur due to a
falling unit.
● Use appropriate Personal Protective Equipment (PPE), such as gloves and protective goggles and, where
appropriate, have a gas mask nearby. Also use electrical protection equipment and tools suited for electrical
operation purposes. Keep a wet cloth and a re extinguisher nearby during brazing. Use care in handling,
rigging, and setting of bulky equipment.
● When transporting, be careful when picking up, moving and mounting these units. Although the unit may
be packed using plastic straps, do not use them for transporting the unit from one location to another. Do
not stand on or put any material on the unit. Get a partner to help, and bend with your knees when lifting to
reduce strain on your back. Sharp edges or thin aluminum ns on the air conditioner can cut ngers, so wear
protective gloves.
● Do not touch or adjust any safety devices inside the indoor or outdoor units. All safety features, disengagement,
and interlocks must be in place and functioning correctly before the equipment is put into operation. If these
devices are improperly adjusted or tampered with in any way, a serious accident can occur. Never bypass or
jump-out any safety device or switch.
Read this manual carefully before working with this product.
Keep this information with the product.
● For details on wiring between the indoor unit and the outdoor unit, refer to the installation and maintenance
manual for the outdoor unit.
● For details on the optional controller, refer to the installation and maintenance manual for that optional
controller module.
● For details on each optional part, refer to the installation and maintenance manual for each optional part.
● For central controller, refer to the installation and maintenance manual for the central controller.
Forward this manual and the warranty registration instructions to the next team of installers and then users.
Ask them to keep this manual with the air conditioning unit.
(Refrigerant Piping Work) (Electrical Wiring Work) (Ref. Charge Work) (Test Run) (User)

Johnson Controls TIWM018B22S Specifications

General

Brand	Johnson Controls
Model	TIWM018B22S
Category	Air Conditioner
Language	English